返回首頁
加入收藏
聯系我們TE-205-B-5-C-2-A 傳感器MAMAC SYSTEMS山東分公司
描述
外面的空氣濕度和溫度傳感器的hu-227設計處理100%冷凝濕度。電子水分與丙烯酸涂料封閉，和傳感元件與膨體聚四氟乙烯保護（聚四氟乙烯）過濾介質。該單元可以直接安裝在空氣處理新鮮空氣罩或在任何建筑物屋頂懸。傳感器也可以安裝空氣處理新風管內。
聚四氟乙烯保護交聯電容式濕度傳感器不受長時間暴露于冷凝濕度，影響惡劣的環境中，污染物，霧或其他環境條件。崎嶇的NEMA-4（IP-65）額定鋼外殼，厚壁鋁探頭和墊片密封蓋廠安裝應用提供可靠的解決方案。
每個hu-227在NIST可溯源校準室達到或超過2%或3%相對濕度RH精度多點校準。單位溫度補償過30癋（35癈）+ 130癋（55癈）可以忽略的錯誤操作的溫度范圍。hu-227提供超過16種可互換NTC熱敏電阻、精密鉑、鎳或balco RTDs通用兼容性。
的hu-227采用交聯聚合物電容式濕度傳感器和精密 NTC熱敏電阻、鉑或BALCO RTD溫度傳感器。溫度和濕度傳感器免疫大部分污染物，同時提供一個穩定的、可重復的、的濕度和溫度測量 忽略磁滯。傳感元件不受冷凝。 事實上，探頭可在蒸餾水中浸泡而不降低校準 。的hu-227采用集成電路提供高水平、全空調，溫度補償?shù)臐穸容敵觥崦綦娮铚囟葌鞲衅骺膳c16多個不同的行業標準電阻溫度曲線 提供兼容大多數如果不是所有的 控制系統。所有的熱敏電阻傳感器提供 0.2癈互換性、準確性和 嚴格符合工業標準的R / T曲線。的 鉑熱電阻抯可與100歐姆或1000歐姆 DIN 43760標準與0.12% 精度在0癈。所有溫度傳感器 超過3兆瓦/癈散熱 常數。
美國MAMAC Systems公司主要銷售MAMACSystems型號：TE-701/702、TE-701BX、TE-705、TE-703/704、TE-211Z-213、TE-707、TE-205-F、TE-706-B、TE-205-EX、TE-205-EU、TE-205、A-505、A-500、PR-243、PR-274/275、PR-264、PR-276、PR-265、PR-282、A-520、A-523、HU-224/225、HU-226、HU-227、HU-921、HU-225、HU-225-EU、IP-PC-101-44-VDC、IP-PC-101-80-VDC、IP-MT-101、IP-MT-201、IP-MT-150、IP-SM-101、IP-PLE-85
MAMAC SYSTEMS PR-274-R3-VDC NSFP PR274R3VDC
MAMAC SYSTEMS PR-274-R3-VDC USPP PR274R3VDC
MAMAC SYSTEMS PR-274-R7-VDC PRESSURE TRANSDUCER IN A BOX
MAMAC SYSTEMS PR-275-R1-VDC USPP PR275R1VDC
MAMAC SYSTEMS PR-276-R10-MA NSFP PR276R10MA
MAMAC SYSTEMS PRESSURE TRANSDUCER PR-264-R6-VDC 1 of 1 in box.
MAMAC SYSTEMS PS-200-1-A-1-L NSFP PS2001A1L
MAMAC SYSTEMS PS-200-1-A-1-L USPP PS2001A1L
MAMAC SYSTEMS PS-200-1-A-1-N NSFP PS2001A1N
Mamac Systems PS-200-1-A-1-N Power Supply In Box
MAMAC SYSTEMS PS-200-1-A-3-N 24V AC POWER SUPPLY
MAMAC SYSTEMS PS-200-1-B-1-N POWER SUPPLY 115V-AC 24V-DC 3A B224322
MAMAC SYSTEMS PS200-1-B-1-N NSFP PS2001B1N 安全Mamac Systems傳感器
MAMAC SYSTEMS PS200-1-B-1-N USPP PS2001B1N
MAMAC SYSTEMS RE-440-3 NSFP RE4403
MAMAC SYSTEMS TE-205--C-5-C-2-A NSFP TE205C5C2A
MAMAC SYSTEMS TE-205-B-5-C-2-A NSFP TE205B5C2A
MAMAC SYSTEMS TE-205-B-7-D-2 NSPP TE205B7D2
MAMAC SYSTEMS TE-205-B-7-D-2 USPP TE205B7D2
MAMAC SYSTEMS TE-205-C-5-A-2-A NSFP TE205C2A
MAMAC SYSTEMS TE-205-C-5-B-2-A NSFP TE205C5B2A
功能特色外面的空氣溫濕度傳感器
超快速反應交聯聚合物電容式傳感元件
專有的疏油聚四氟乙烯過濾器以保護敏感元件的冷凝，霧，鹽空氣疏水性污染物和其他污染物
保形涂層和防潮密封電子
堅固的不銹鋼外殼和厚壁鋁探頭額定NEMA-4（IP-65）抵御天氣
NIST±2% RH或±3%相對濕度校準精度
兩溫度補償?shù)臐穸容敵霭姹荆?-20mA二線或現場可選0-5 VDC / 0-10 VDC
符合EMC、ROHS標準
確定系統的版權，Inc.
FeaturesOutside Air Humidity Temp Sensor
Ultra fast response cross-linked bulk polymer capacitive sensing element
Proprietary hydrophobic and oleophobic ePTFE filter to protect the sensing element from condensation, fog, salt air, pollutants and other contaminants
Conformal coated and moisture sealed electronics
Rugged steel enclosure and thick-walled aluminum probe rated NEMA-4 (IP-65) to withstand weather extremes
NIST traceable ±2% RH or ±3% RH calibration accuracy
Two temperature compensated humidity output versions, 4-20 mA 2-wire or field selectable 0-5 VDC/0-10 VDC
Conforms to EMC and RoHS standards
在VDC輸出單元（濕度只），另外兩 場可選項；雙 0-5或0-10 VDC輸出，雙規 12-35 VAC或12-40 VDC電源電壓。通過 僅僅是移動一個開關，可以選擇 期望輸出的具體應用。據 作為電源電壓有關，單位自動 配置交流或直流無場 選擇是必要的。VDC輸出單元 也用來處理低阻抗電路。 事實上，單位可以開車到1K的電阻zui小。 這樣，多個控制器，指標， 或其他設備可以平行于。
馬輸出單元（濕度只有）功能 在很寬的穩壓電源電壓范圍： 12-40任何影響校準或 直流無。該單元具有反向極性保護 建。因此，它是一 可能損傷單元的接線 錯誤。
采用*低電壓差 監管者和CMOS集成電路，馬 輸出單元可以驅動高輸出阻抗 。事實上，只有12伏直流電源， 單元可以驅動。在40伏直流電，這 單元能夠處理多達1500歐姆負載 。這樣，輸出回路可以綁在 系列多個控制器，指標，和其他設備 不降低 性能。
濕度傳感器是由聚四氟乙烯保護 （聚四氟乙烯）的過濾介質，采用 專有工藝擴大或延伸 超薄板在制造過程 聚四氟乙烯 創建小于1微米的 （0.000039英寸。疏水 和聚四氟乙烯 力水分疏油特性，凝結和其他污染物 形成泡沫大于孔徑， 表面張力 和聚四氟乙烯停止 水或其他污染物通過 通過過濾介質，從而保護 。然而，空氣 吸收水分很容易滲透過濾介質。 PCB電子包封 丙烯酸涂覆保護 水分，冷凝。
采用了堅固的hu-227 NEMA-4 （IP-65）*密封，防塵和防濺 。外殼有一個外部 安裝支架，方便現場安裝。一個 綌（875／22.25毫米直徑）敲除對 管道連接也提供。液體 緊電纜的連接器，如果單位不 硬有線提供。一旦安裝，外殼 保持其環境評價和保護 電子傳感元件從 結露，腐蝕性污染物和其他 環境污染物。外殼也 已安裝 包括斷開式端子和易 訪問零點和量程機方便的附加功能。
The HU-227 Outside Air Humidity and Temperature Sensor is designed to handle 100% condensing humidity. The electronics are moisture sealed with an acrylic coating, and the sensing element is protected with an ePTFE (expanded Teflon) filter media. The unit can be directly mounted inside fresh air hoods of air handlers or underneath roof overhangs of any building. The sensor can also be installed inside the air handler fresh air duct.
The Teflon protected cross-linked capacitive humidity sensor is not affected by prolonged exposure to condensing humidity, harsh environments, contaminants, fog or other extreme environmental conditions. The rugged NEMA-4 (IP-65) rated steel enclosure, thick-walled aluminum probe and gasket sealed cover offer a reliable solution for factory-mounted applications.
Each HU-227 is calibrated at multiple points in a NIST traceable calibration chamber to meet or exceed ±2% RH or ±3% RH accuracy. Units are temperature compensated over -30°F (-35°C) to +130°F (55°C) temperature range operation with negligible error. HU-227 is available with more than 16 types of interchangeable NTC thermistors, precision platinum, nickel or balco RTDs for universal compatibility.
The HU-227 incorporates a cross-linked bulk polymer capacitive humidity sensor and precision NTC thermistor, platinum or balco RTD temperature sensor. Both temperature and humidity sensors are immune to most contaminants and at the same time provide a stable, repeatable, accurate humidity and temperature measurement with negligible hysteresis. The sensing elements are not affected by condensation. In fact, the probe may be immersed in distilled water without degrading the calibration accuracy. The HU-227 utilizes sophisticated integrated circuits to provide a high level, fully conditioned, and temperature compensated humidity output. The thermistor temperature sensors are available with more than 16 different industry standard resistance to temperature curves offering compatibility to most if not all control systems. All thermistor sensors offer ±0.2°C interchangeability/accuracy and strictly conform to industry standard R/T curves. The platinum RTD’s are available with 100 ohm or 1000 ohm DIN 43760 standards with ±0.12% accuracy at 0°C. All temperature sensors have more than 3.0 mW/°C heat dissipation constant.
On VDC output units (humidity only), two additional field selectable options are available; dual outputs 0-5 or 0-10 VDC, and dual unregulated supply voltages 12-35 VAC or 12-40 VDC. By merely moving a switch, one can select the desired output for the specific application. As far as supply voltage is concerned, the unit automatically configures for AC or DC and no field selection is necessary. The VDC output unit is also designed to handle low impedance circuits. In fact, the unit can drive up to 1K ohm minimum. In this way, multiple controllers, indicators, or other devices can be paralleled to the output without performance degradation.
The mA output units (humidity only) function over a wide unregulated supply voltage range: 12-40 VDC without any effect on calibration or performance. The unit has reverse polarity protection built in. As a result, it is next to impossible to damage the unit by wiring incorrectly.
By using sophisticated low dropout voltage regulators and CMOS integrated circuits, the mA output unit can drive very high output impedance. In fact, with only 12 VDC supply, the unit can drive 250 ohms. At 40 VDC, the unit is capable of handling up to a 1500 ohm load. In this way, the output loop can be tied in series to multiple controllers, indicators, and other devices without degrading the performance.
The humidity sensor is protected by an ePTFE (expanded Teflon) filter media that incorporates a proprietary process of expanding or stretching an ultra thin Teflon sheet during the manufacturing process to create less than 1.0 micron (0.000039 inch) pores or holes. The hydrophobic and oleophobic characteristics of Teflon force moisture, condensation and other contaminants to form a bubble larger than the pore size, and the surface tension of the Teflon stops the water or other contaminants from passing through the filter media, thereby protecting the sensing element. However, air with absorbed moisture can easily penetrate the filter media. The PCB electronics are coated and sealed with an acrylic conformal coating to protect against moisture, condensation and contaminants.
The HU-227 incorporates a rugged NEMA-4 (IP-65) fully gasketed, dust proof and splash proof enclosure. The enclosure has an external mounting bracket to facilitate field installation. A ?” (.875”/22.25 mm diameter) knock-out for conduit connection is also provided. A liquid tight cable connector is supplied if the unit is not being hard wired. Once installed, the enclosure maintains its environmental rating and protects the electronics and the sensing element from condensation, corrosive contaminants and other environmental pollutants. The enclosure also has additional features for ease of installation including unpluggable terminal block and easily accessible zero and span trimmers.
Copyright MAMAC Systems, Inc.
